Brass Concealed Shower Set

Brass Concealed Shower Set is a shower system that is installed inside the wall, with only the shower head, hand shower and control components exposed on the surface. It is made of brass as the main material and is processed with exquisite craftsmanship. It includes overhead shower, hand shower, thermostatic or ordinary mixing valve and other components. It is connected to the water source through concealed pipes, providing users with a full range of shower experience. It is a high-end bathroom equipment in modern bathroom space.

Characteristic of Brass Concealed Shower Set:

1. High material hardness: Brass Concealed Shower Set is made of brass, with a Mohs hardness of about 3.5, which is much higher than ordinary plastic shower products, ensuring that the set is not easy to deform or damage during long-term use, can withstand large water pressure impact, and has a long service life, providing users with a long-lasting and stable shower experience.

   
   

2. Strong corrosion resistance: Brass material has excellent corrosion resistance. Under the standard salt spray test (5% NaCl solution, relative humidity above 95%, temperature 35±2℃), after 72 hours of testing, its surface corrosion depth is less than 0.01mm, which can effectively resist the erosion of the humid environment of the bathroom and trace chemical components in the water quality, and maintain the appearance and performance of the product.

   
   

3. Stable water flow rate: The water outlet of the top shower head is precisely processed, and the flow coefficient can reach above 0.9. Within the common water pressure range of 0.1MPa to 0.3MPa, the water flow rate can be stabilized at 10 to 15 liters per minute, ensuring that the shower water flow is strong and uniform, bringing users a comfortable and refreshing shower experience.

   
   

4. High temperature control accuracy: If it is a constant temperature Brass Concealed Shower Set, the temperature control accuracy of its constant temperature valve core can reach ±1℃. When the pressure of the hot and cold water sources changes (such as turning on other water-using equipment), it can quickly respond and adjust the water temperature within 2 seconds, ensuring that users are free from the trouble of hot and cold water temperatures during the shower process.

   
   

5. Fine surface treatment: The surface adopts multi-layer electroplating technology, such as first plating 0.01mm to 0.02mm thick nickel as the base, and then plating 0.005mm to 0.01mm thick chromium, so that the surface finish of the product reaches the mirror effect, and the glossiness can reach more than 60 degrees. After the wiping test (using 75% alcohol cotton balls, pressure 500g, reciprocating wiping 1000 times), there are no obvious scratches and wear on the surface, which is easy to clean and maintain.

   
   

6. Precise size adaptation: The size of each component strictly follows international standards. The size of the handheld shower is about 100mm×60mm×180mm, which can be accurately adapted to bathroom spaces and wall structures of different sizes, ensuring convenient and beautiful installation.

Brass Concealed Shower Set Parameters

Where to use Brass Concealed Shower Set?

1. High-end hotel bathrooms: In the standard guest room bathrooms of five-star hotels, Brass Concealed Shower Set perfectly integrates into the hotel's luxurious decoration style with its exquisite appearance and excellent performance. Its hidden design can effectively broaden the visual effect of the bathroom space and create a spacious and comfortable bathing environment for guests staying in the hotel. At the same time, the high-precision temperature control system and stable water flow rate meet the needs of business people and leisure travelers for high-quality showers, and improve the overall service quality and competitiveness of the hotel.

   
   

2. Luxury residential bathrooms: In large-sized residential or villa bathrooms, this shower set can become a key element to enhance the home style. For example, it is installed in the master bedroom bathroom, matched with high-end facilities such as marble walls and floors, smart toilets, etc., to form a modern and fashionable bathroom space, providing residents with a SPA-like shower enjoyment, highlighting the owner's taste and quality of life.

   
   

3. High-end club sauna area: In the sauna shower area of a large fitness club or leisure club, Brass Concealed Shower Set can adapt to the special environment of humidity and large traffic. Its strong corrosion resistance enables it to operate stably for a long time in the high temperature and high humidity environment of the sauna room, meeting the members' shower needs after the sauna. The hidden installation not only ensures the neatness and beauty of the sauna area, but also avoids the inconvenience of protruding components to members' activities, and enhances the professional image and user experience of the club.

   
   

4. Commercial apartment bathroom: For modern apartment bathrooms in commercial apartments, space utilization and decoration style are crucial. Brass Concealed Shower Set can free up more activity space for apartment bathrooms through concealed installation in the wall, which is convenient for arranging other bathroom facilities such as sinks and toilets. Its simple appearance design fits the fashionable and simple decoration trend of commercial apartments, creating a comfortable and exquisite shower atmosphere in a limited space to attract tenants or guests.

   
   

5. Large shopping mall bathroom: In the public toilets of large shopping malls, especially the toilets on the high-end brand floors, this shower set can be used in VIP toilets or maternal and child toilets. Its high-quality materials and design can withstand the test of frequent use and complex environments in public places, provide customers with good bathing conditions, reflect the shopping center's emphasis on customer service, and enhance customers' shopping experience and satisfaction.

   
   

6. Private Yacht Bathroom: In the compact bathroom of a private yacht, the Brass Concealed Shower Set is an ideal choice for its small size and concealed installation features. It can be cleverly integrated into the luxurious interior style of the yacht, saving space while providing high-quality shower functions. In a swaying sailing environment, its stable installation structure and stable water discharge performance ensure that users can enjoy a comfortable shower at sea, satisfying the ship owner and passengers' pursuit of high-quality life.

Brass Concealed Shower Set Maintenance:

1. Daily cleaning and maintenance: After each shower, use a clean and soft non-woven cloth or microfiber towel to gently wipe the surface of the shower head to remove residual water stains and soap dirt. For stubborn stains, soak the shower head in warm water, add an appropriate amount of neutral detergent, soak for 15 to 20 minutes, and then gently scrub it with a soft brush. Avoid using rough cleaning tools or strong acid and alkaline detergents to avoid scratching the surface or corroding the material, ensuring that the shower head is as bright as new and extending its service life.

   
   

2. Regularly check the seals: Check the seals of the Brass Concealed Shower Set at least once a quarter, including the sealing rubber rings and gaskets at the mixing valve and pipe connections. If the seal is found to be slightly deformed, a special seal lubricant can be applied to the surface of the seal to restore its elasticity; if the seal is damaged or aged, the seal of the same specification and material should be replaced in time to prevent water leakage and ensure the normal operation of the shower system.

   
   

3. Scale treatment and maintenance: In areas with hard water, descaling maintenance should be performed once a month. You can mix white vinegar (concentration of about 5% to 8%) with water in a 1:1 ratio, soak the shower head in the solution, and let it stand for 3 to 4 hours to fully dissolve the scale. After that, rinse the shower head thoroughly with clean water and wipe it dry with a soft cloth. For the pipes inside the shower, you can pour a descaling agent (such as a pipe descaling agent containing citric acid) into the pipes according to the dosage in the product manual, keep it for 6 to 8 hours, and then rinse it with clean water to effectively remove the scale on the inner wall of the pipe, keep the water flow unobstructed, and improve the water quality.

   
   

4. Thermostatic valve core maintenance: For the thermostatic Brass Concealed Shower Set, the thermostatic valve core needs to be professionally maintained once a year. Have a professional maintenance person disassemble the valve core and check whether the temperature sensing element inside the valve core (such as the paraffin pack in the candle-type thermostatic valve core) has signs of leakage or damage. If the expansion and contraction function of the paraffin pack is abnormal (such as the expansion coefficient is reduced by more than 10%), the valve core needs to be replaced; at the same time, clean the impurities and scale inside the valve core, check whether the transmission gear is worn (such as the tooth surface wear exceeds 0.1mm), and apply an appropriate amount of high-temperature grease (such as molybdenum disulfide grease) to ensure the sensitivity and temperature control accuracy of the valve core and the shower comfort of the user.

   
   

5. Surface protection and maintenance: Protect the surface of the Brass Concealed Shower Set once every six months. First rinse the surface with clean water, then evenly spray a special metal surface protective agent (such as a protective agent containing nano-aluminum oxide) on the surface of the shower head, valve and other parts, wait for 5 to 10 minutes, so that the protective agent forms a thin and dense protective film on the surface. After that, wipe it with a clean soft cloth, which can effectively isolate the erosion of the surface electroplating layer by water vapor and chemical components in the air, enhance the surface's scratch resistance and self-cleaning ability, and maintain the high-end appearance of the product.

   
   

6. Pipeline system maintenance: Perform a comprehensive inspection of the pipe system connected to the Brass Concealed Shower Set at least once a year. After closing the main water valve, turn on the shower equipment and observe whether there is leakage at the pipe interface; at the same time, check whether the pipe has signs of corrosion, scaling or blockage. If the pipe is found to have slight scaling, it can be unblocked with a pipe dredging agent (such as a dredging agent with biological enzyme as the main ingredient); for severely corroded or damaged pipe parts, pipes of the same material and diameter should be replaced in time to ensure the safety and reliability of the water supply system and provide a stable water source support for the shower equipment.

Brass Concealed Shower Set FAQs:

1.Are rust and corrosion common with your Brass Concealed Shower Set?

No, our matte black bath room fittings are crafted from high quality materials including stainless steel, zinc alloy and brass which are corrosion resistant. To add on, the surface of these fittings is coated with a special anti-corrosion layer so they remain undamaged even in environments such as bathrooms which are quite wet.

2.Will the finish of matte black components wear out and even get chipped off in the course of time?

No, our fittings experience other forms of plating like powder coating, therefore, the matte black color of the fittings does not go away. Furthermore, we perform adhesion and scratch resistance tests on our fittings to guarantee hard wearing characteristics and color fastness.

3.Is it advisable to apply the black matte bathroom fittings on your own?

Yes, all our products include simple installation guidelines as well as required mounting hardware. Our products are suitable for Do It Yourself installation, however, it is wise to get a professional to install them for proper alignment and stability.

4.How do I clean and maintain the matte black surface?

Our suggestion for the ordinary care of your fittings and other products is to use a soft cloth and mild soap solution to clean the continue to perform their tasks. Among other things, we would implore customers to avoid scrub brushes and abrasive cleaning agents because they could affect the surfaces of the fittings. 

5.Are there options to customize a bulk order?

Yes, we offer customization like size, logo, and packaging design to our clients. When it comes to B2B, we also provide flexible timelines for large-scale orders to align with your project plans.